This study details the removal of common storm water pollutants along with heavy metals by enhanced sand filtration. Three filtration flow rates were trialled: 5, 10 and 20 m/h. The performance of each filter was rated on the ability to remove turbidity, suspended solids, dissolved solids, phosphorus, nitrogen, lead, copper and Zinc. Conventional sand filter was used as a performance benchmark, and compared with four sand filters that are enhanced with a nylon carpet fibre, polypropylene carpet fibre, Syrian carpet fibre-enhanced and alum sludge-enhanced sand filter. Carpet fibre-enhanced sand filtration was highly effective at filtering simulated storm water and in most cases performing well above the conventional sand filters. The carpet fibre-enhanced sand filters had no drop in flow rates over the 4 h filtration period with following removal rates: up to 90% total suspended solids, 70% zinc, 60% turbidity, 25% phosphorus, 15% nitrogen and 10% total dissolved solids. However, results showed that alum sludge-enhanced sand filter performed the highest, with removal rates up to 100% for total suspended solids, 80% zinc, 90% turbidity, up to 80% phosphorus, up to 40% nitrogen and 3% total dissolved solids. But the flow rates dropped approximately two-thirds of the original flow rates within the first hour.
↧